|Home||» Products||» Double Pinch Roll||» Double Pinch Roll|
Being a well established organization, we bring forth an excellent assortment of Double Pinch Roll that is primarily used for pressing magnetic tape against a capstan shaft. The equipment offered by us is widely appreciated by our valuable clients owing to its long service life and smooth functioning. This machine can also be availed from us in enormous models and various technical specifications. Our offered Double Pinch Roll is manufactured under the stern supervision of our adept professionals utilizing quality approved components and advanced technology.
DETAILS OF DESCRIPTION
DOUBLE PAY OFF REEL
This double pay off reel assure continuous feeding without reloading. The cut side is feeling strip to the mill to other side available for coil is un busted by releasing in the complete arrangement and loads its own unit and strip shearing.
To maintain the mill centre the entry guide arrangement is provide.
STRIP GUIDE ARRANGEMENT
Before the strip is fed to the mill it is properly guided by means of 1 set of horizontal and 3 set of vertical rollers and for it proper positioning during this operation, strip edges cap bead will slide. These have of by edge trimming tools which are dully provided in between roll guiding arrangement.
Pinch roll are driven are type double output gearbox. The upper roll is raised and lowered by pun mated alloy operated with cylinder and solenoid valve, strip will be guided by slides by entry guide roll arrangement.
The Strip leveller consists of 3-roller level the incoming strip before it is feed into sheer edge welder. These should be arrangement to adjust the upper roller and all rollers are EN-9 hardened and ground.
A "rigidity stand" mounted with top and bottom stamping roll for stamping of company monogram on every one-meter pipe length has also been provided.
FARMING MILL DRIVEN ROLL STAND
3 nos. of forming roll stand properly machined and fitted with TR bearing 32214 in the chocks mounted with 85mm dia shaft machine from EN-9 material dully-hard crome plated and ground finished are provided. The drive to the entire stand will be through worm type reduction gearbox. These gearboxes are coupled with proper shafts.
CLUSTER SLIDE (V.F.R. 1,2,3.)
This unit consists of three set of vertical forming roll slide mounted with shaft made by alloy steel dully hard and chrome plated to suit with TR bearing 32212 and shaft dia 60mm.
FIN ROLL STAND
3 nos. of driven fin roll stand identical to sizing stand having shaft dia 85mm and dully fitted with TR bearing 32214 in the stand chocks are provided for proper strip formation.